U100-U80-U60 reset application of system

U100-U80-U60 reset application of system

  • pls connect the HDMI interface to your Monitor
  • pls connect the keyborad to the USB 
  • pls input super/super  once it prompt username and password
  • you can try to select option 1 to reset or other option to config,and option 4(V3  system) to reset admin password only.
  • input super as password to confirm again ,then system will automatically reboot


    • Related Articles

    • U50V2&U20V2 reset factory

      1.reset whole system,step as follow turn off device press the reset button and turn on the device,release the reset button after about 6-8s  until the sys led goes on wait about 8mintues,system will bootup again smoothly if it is correct 2.reset only ...
    • U20-U50 Reinstall System

      If you system is damage and you have to redo system.so pls follow next step Step1: 1.About v1 ,pls download the v1 image 2.About v2,pls download v2 image 3.Notice:pls dont use v1 install v2 image cause it is different hardware . you can find the SD ...
    • V3-ZYCOO Proxy Application

      Hi pls find out the attachment,then try to refer ​
    • Console Port Connection Instruction

       It is used to debug device when you forgot the ssh and GUI password or device can not boot up. Console parameter,115200 8 n 1  1. Find one cable same as cicso console line 2.Download the client putty,try to login The COM3 you can find from the ...
    • V3-WebRtc Instruction

      Please try to find out the attachment