U50V2&U20V2 reset factory
1.reset whole system,step as follow
- turn off device
- press the reset button and turn on the device,release the reset button after about 6-8s until the sys led goes on
- wait about 8mintues,system will bootup again smoothly if it is correct
2.reset only application
- device is on working status,and sys indicator is blinking once per second
- press Reset button about 6s-8s,then relese and it will recovery application,
- but usually we didnt use this ,and prefer to reset from GUI
Related Articles
T100&T200 Reset To Factory
Please find out the attachment when you want to reset device
How to reset IAS-L100
How to reset IAS-L100?you can refer to the attachment.
U100-U80-U60 reset application of system
pls connect the HDMI interface to your Monitor pls connect the keyborad to the USB pls input super/super once it prompt username and password you can try to select option 1 to reset or other option to config,and option 4(V3 system) to reset admin ...
How to Active P2P PhoneCall
you can do "How to use P2P call" with the manual in attachment .
How to Auto Provision
you can do "How to Auto Provision " with the manual in attachment . there are four method to do it ,so you can select one if you have a lot endpoints and you have built your provision server before.